Radio Shack 24 Range Digital Multimeter 22-805 Manual Jun 2026

Most users lost the manual because they assumed it was obvious. It’s not .

| Problem | Probable Cause | Solution (from manual) | | :--- | :--- | :--- | | No display, no segments | Dead 9V battery | Replace battery. Check battery snap connection. | | Flashing "BAT" symbol | Low internal battery | Replace battery (9V). Reading may be 10-20% off. | | Reads "1" on all ranges | Overload condition, or test lead not fully seated | Check V/Ω and COM jacks. Turn dial to OFF then on. | | No continuity beep | Beep disabled, or leads damaged | Check dial is on buzzer symbol. Short leads – if no beep, replace leads. | | Blows fuse on 200mA range | Measured >200mA | Replace with 200mA/250V fast-blow. Do not use slow-blow. | | AC voltage reading unstable | Dirty dial contacts | Rotate dial back and forth 10-15 times. Clean with DeoxIT. | radio shack 24 range digital multimeter 22-805 manual

Plug the red lead into the V terminal and the black lead into COM . Turn the dial to ACV or DCV before connecting to a live circuit. Most users lost the manual because they assumed