Hw-416-b Pir Sensor Datasheet !full! -

The HW-416-B has two trimmer potentiometers and one jumper, which are essential for configuring behavior. Understanding these is critical to using the datasheet effectively.

For more detailed information, you can download the HW-416-B PIR sensor datasheet from the following resources: hw-416-b pir sensor datasheet

If motion is detected while the output is already high, the "delay timer" restarts. The output stays high as long as there is continuous movement. 5. Typical Applications The HW-416-B has two trimmer potentiometers and one

if (motionState == HIGH) digitalWrite(ledPin, HIGH); Serial.println("Motion Detected!"); delay(100); else digitalWrite(ledPin, LOW); The output stays high as long as there

| Parameter | Min | Typ | Max | Unit | |----------------------|------|------|-------|-------| | Supply voltage | 4.5 | 5 | 20 | V | | Output high voltage | 2.8 | 3.3 | 3.4 | V | | Output low voltage | 0 | 0.4 | 0.6 | V | | Output current (max) | - | - | 100 | mA | | Standby current | - | 0.05 | 0.1 | mA | | Operating temp | -20 | 25 | +80 | °C | | Delay time range | 0.5 | - | 200 | sec | | Detection range | 3 | 5 | 7 | m |