Ensure the MediaTek (MTK) USB VCOM drivers are installed on your PC. Load Scatter File: Open SP Flash Tool.
| Error Code | Message | Solution | | :--- | :--- | :--- | | | DA not recognized | Reinstall MTK USB drivers. Disable driver signature enforcement. | | ERROR: S_BROM_CMD_STARTCMD_FAIL (0x7D0) | USB connection issue | Try a different USB port (USB 2.0 preferred). Use a different cable. | | ERROR: S_FT_ENABLE_DRAM_FAIL (0xFC0) | DRAM test failed | The firmware is incompatible. Download the correct MT6737m version. | | ERROR: S_SECURITY_SECURE_USB_DL_DISABLED (0x6004) | Secure USB download disabled | Use SP Flash Tool v5.19 or higher. Or use "Download Agent" (DA) from the firmware folder. | | Phone not detected | No VCOM port | Check Device Manager. Manually install the MediaTek PreLoader USB VCOM port (appears for 2 seconds on connection). | Alcatel 9015Q Flash File MT6737m 6.0 Tested - Firmware
He scrolled through the obscure forums, bypassing clickbait links and ad-ridden download pages. Finally, he found a thread dated two years ago. The title was simple: Ensure the MediaTek (MTK) USB VCOM drivers are
A means that the package has been verified to boot successfully, has no missing partitions, and contains no malicious code. Disable driver signature enforcement
chipset and runs on . This firmware is typically used to fix software issues like boot loops, hang-on-logo, or to remove FRP (Factory Reset Protection). Firmware Details Device Name: Alcatel 9015Q (Tablet) Chipset: MediaTek MT6737M Android Version: 6.0 (Marshmallow) Flashing Tool: SP Flash Tool (Smartphone Flash Tool) File Type: Scatter-based Firmware Flashing Instructions
This guide covers the process of flashing the (often associated with the Pixi 7 LTE) using the MT6737m chipset firmware and Android 6.0 Marshmallow.
"Is it ready?" Mr. Santos asked, his voice tight.
