Click the button labeled "Bootable USB Flash" (or navigate to Regeneration > Create Bootable Flash ).
: Choose your USB drive from the list and click OK to begin the process. 2. Boot from the USB how to use hdd regenerator bootable usb
Click the button labeled "Bootable USB Flash" (or go to Regeneration > Create Bootable Flash ). Click the button labeled "Bootable USB Flash" (or
Legacy and modern HDDs (SATA/IDE). Not for SSDs (Solid State Drives). Boot from the USB Click the button labeled
| Error | Solution | | :--- | :--- | | "No hard drive found" | SATA mode in BIOS is set to RAID or Intel RST. Change BIOS SATA mode to or Compatible . (Change it back after repair). | | "USB not booting" | Disable Secure Boot in BIOS. Enable Legacy Boot or CSM . | | "Freezing at 0%" | The drive heads are stuck. Tap the drive gently (no joke, sometimes works) or freeze the drive for 2 hours in a sealed bag. | | "Too many bad sectors" | If >500 bad sectors appear in the first 10 minutes, abort. The drive is e-waste. |