Sinotimer Tm630s Manual [upd] -

Sinotimer TM630S is a heavy-duty, 7-day digital programmable timer switch designed for both residential and industrial automation. It is characterized by its high-accuracy CMOS chip, 30A load capacity, and 1-second minimum interval timing. Alibaba.com Technical Specifications Power Supply 200–250VAC 50/60Hz (Standard); 12VDC, 24VDC, 110VAC (Custom) Load Capacity 30A 250VAC (Resistive) Timing Range 1 second to 168 hours 28 ON/OFF programmable groups per day/week Memory Backup Built-in CR2032 or rechargeable battery (90-day power reserve) 35mm DIN rail or Screw-mounting Device Layout & Unlocking The device features a high-definition LCD and 8 large buttons. Auto-Lock: The keypad automatically locks after 30 seconds of inactivity to prevent accidental changes. To Unlock: button 4 times quickly until the lock icon (a small "a") disappears from the screen. Programming Guide 1. Setting the Current Time To synchronize the timer with the actual time: button while pressing: : Adjust the current day of the week. : Adjust the hour. : Adjust the minutes. : Adjust the seconds. Format Toggle: for 4 seconds to switch between 12-hour and 24-hour formats. 2. Setting ON/OFF Programs button. "1 ON" will appear on the display. to select the day combination (e.g., Daily, Weekdays, Weekends, or specific days). to set the desired start time. again. "1 OFF" will appear. Set the turn-off time using Repeat for up to 28 program slots. Press to save and exit. Yueqing Xinyang Technology Co., Ltd. 3. Manual Override button to cycle through four states:

The SINOTIMER TM630S is a digital programmable weekly timer switch designed to automate electrical equipment like streetlights, water heaters, and agricultural sprayers. Unlike standard models, the "S" series specifically allows for 1-second interval settings. Key Specifications Programs: Up to 28 ON/OFF cycles per day. Timing Range: 1 second to 168 hours. Capacity: Rated for 30A resistive loads. Variants: The TM630S-1 is for 100–130V systems, while the TM630S-2 is for 200–250V. Battery: Includes an internal CR2032 battery to save programs during power failures. Initial Setup & Unlocking The TM630S features an auto-lock to prevent accidental changes. Unlock: Press the C/R button 4 times to clear the "a" or lock symbol from the screen. Reset: Use the RESET key (often a recessed button) before first use to clear factory memory. Set Time: Hold the CLOCK (clock icon) button while pressing D+ (Week), H+ (Hour), or M+ (Minute) to set the current time. Programming Steps To set an automated schedule, follow these steps after unlocking the device:

The Last Reset When the power strip in Mr. Alvarez’s workshop failed for the third time that month, he didn’t sigh—he smiled. Fixing things was what he lived for. He shuffled through a metal cabinet full of spare parts, fuses, and instruction booklets until his fingers closed on a slim, grease-smudged manual titled “Sinotimer TM630S Manual.” The cover was creased; a small coffee ring blurred the logo. He had no memory of buying the timer, but he did remember the machine it once controlled: an old conveyor press that had made handcrafted tiles for a coastal hotel decades ago. The manual smelled faintly of ozone and old paper. Mr. Alvarez opened it at random and read the first line aloud, as if invoking permission. The TM630S, the page said, was precise to the second, designed for industrial environments, built to be reset and kept alive. That felt like a promise. He tucked the manual into his pocket and wheeled the failing power strip under the workbench, thinking of the conveyor press as if it might be alive somewhere, waiting. Outside, the town was a scatter of low houses and fishing boats, the sea a distant silver strip. Inside the workshop, time moved differently—measured by the tick of a wall clock and the slow lamplight that pooled over scattered schematics. Mr. Alvarez had been a clockmaker’s apprentice as a boy, and now, in his sixties, he found solace in machines that marked and measured life. The TM630S manual fit into that world: routine, exact, comforting. That evening he traced diagrams with a pen. The manual’s pages were technical but full of little human touches—margin notes in faded blue ink, a sticky tab where the wiring diagram lay. Someone had once underlined a troubleshooting step: “If timer refuses to reset, hold RESET for five seconds while power is cycled.” Underneath, another hand had written, in a hurry, “Works after storm, 1998.” Who had owned this before? What storm? The name at the top of the inside cover—“L. Moreno, Tileworks”—curled like a signature left on a ledge. Curiosity pulled Mr. Alvarez into a small journey. He drove the sinuous coastal roads to the tileworks ruin, a squat building with flaked paint and a cracked skylight. Inside, the conveyor press sat like a sleeping animal beneath a tarp. He brushed dust away and found a hollow in the machine’s frame where a timer would fit. The cavity still smelled faintly of kiln smoke. He returned to his workshop with the manual clenched like a map. He ordered a replacement board—the TM630S was still common enough that parts were easy to find—and when it arrived, he set to work. The manual guided him: wiring color codes, DIP switch settings, the sequence for programming intervals. His hands moved with the steady memory of decades repairing instruments. At dusk, he clipped wires into place and mounted the timer where the hollow in the press had been, imagining how it would click the press into motion every thirty seconds, compressing wet clay into shapes that would later be glazed. Mr. Alvarez hummed as he tested the power. The display flickered awake: bright green digits and a reassuring beep. He followed the manual’s instruction—hold RESET for five seconds while power cycled—and the timer returned to factory defaults with a polite blink. The TM630S had been given a new life. He drove back to the abandoned tileworks under a sky that reddened into purple. There, under the tarp, he installed the timer. The press responded with a mechanical cough and a slow, thoughtful rotation, as if waking from a long dream. Clay dust shivered down into the light. For a moment the building felt crowded with ghosts: the workers who had fed the press like a creature, the hand that had once scrawled “Works after storm, 1998,” the rhythm of a thousand tiles stamped and stacked. Over the next week, Mr. Alvarez visited daily. He followed the manual’s maintenance schedule—monthly power checks, occasional calibration—and in the evenings he brought boxes of reclaimed clay and old glazes. He wasn’t restoring the tileworks for profit. He wanted the press to speak again, to make something honest and ordinary: a row of small, square tiles each stamped with a simple wave motif. He thought of the coastline as he set the pattern, and the tiles looked like captured pieces of the sea. Word spread. A local café asked for a patch of tiles for their bar. A gallery wanted a small installation. People came by to watch a machine that had been silent for decades now click and press like a clock. They asked him who he was fixing it for. He named the owner scrawled in the manual—L. Moreno—and said nothing more. In the margins of the manual, he added his own note: “Reset and running — A. Alvarez, 2026.” On a rainy afternoon, a woman arrived at the workshop with a canvas tote and a careful smile. She introduced herself as Lucia Moreno—the granddaughter of L. Moreno. She had the same dark eyes as the signature in the manual. She had found the manual in a box of papers that had belonged to her grandfather and brought it to the workshop hoping someone might know what the TM630S was. Mr. Alvarez held the manual out to her like a returned relic. Lucia walked the press room with reverence. Her grandfather’s stories had always stopped at the point where the press left the family—how the storm in ’98 had flooded the kilns, how the business dwindled, how the manual had been tucked away and forgotten. When Lucia touched the timer’s warm metal casing, she laughed, surprised by the pulse of the machine. “He would have loved this,” she said. They sat at the workbench with the manual between them. Lucia read the margin note—“Works after storm, 1998”—and traced the ink with a fingertip. Her voice was steady. “He never told us everything. He would set that timer and go sit by the sea until the shift ended. He said the machine needed to be trusted, but you had to listen to it too.” Mr. Alvarez shrugged. “Machines tell you when they need you.” They decided to make a small batch of tiles together—one to hold a memorial plaque for L. Moreno, others to sell to raise funds to repair the kiln. Following the TM630S manual, they adjusted cycles and durations, testing under different loads. The manual, once purely technical, became their shared language: directions for wiring, yes, but also a way to pass time and stories. Lucia told him about the old photographs where her grandfather posed with a cigarette behind his ear and a smear of clay on his shirt; Mr. Alvarez told stories of a childhood in a clockshop and a moth-eaten apprentice’s coat. On the day the first kiln cooled, they opened it and found tiles that caught the light like small, sea-salted mirrors. Lucia kept one with the wave motif and wrote the date and her grandfather’s name on its back. Mr. Alvarez kept the manual tucked into his toolbox. It had been more than instructions; it was a thread connecting people across time. Years later, the tileworks became a modest cooperative. The TM630S sat in its place, a quiet sentinel. Every so often, a young apprentice would flip open the manual and, seeing the handwritten notes, would smile as if discovering a private map. Mr. Alvarez would watch from his bench, content. Machines, he believed, were repositories of labor and memory, and manuals were their stories written in technical prose. The Sinotimer TM630S manual—once a small, anonymous booklet in a drawer—had guided wires and settings, but it had done more: it had reset more than a timer. It had reset an old rhythm, rebuilding a chain of hands that worked with clay and heat and patience. In the margins, under notes of wiring and troubleshooting, someone had once written, “Keep steady.” The machine, the manual, and the people who read it did exactly that. —

0;1052;0;2cb; 0;908;0;f1; 0;88;0;98; 0;279;0;17a; 0;1247;0;b19; 18;write_to_target_document1a;_EZTsacnqGMPJkPIPssqmyQk_10;56; 18;write_to_target_document7;default0;1e1; 18;write_to_target_document1a;_EZTsacnqGMPJkPIPssqmyQk_20;56; 0;fe6;0;5d7; To set up your Sinotimer TM630S0;67;0;bc4; Go to product viewer dialog for this item. 0;bb7;0;97f; , start by pressing the C/R button four times to unlock the panel. This model supports up to 28 ON/OFF programs per day with timing intervals as short as one second. 0;16; 18;write_to_target_document7;default0;8a4;18;write_to_target_document1a;_EZTsacnqGMPJkPIPssqmyQk_20;92;0;a3; 0;baf;0;6e8; 1. Initial Setup & Clock Adjustment  0;16; Before programming, press the RESET button to clear any previous memory. 0;16; 0;381;0;4f6; Set Day : Hold the Clock button and press D+ until the correct day of the week is displayed. Set Time0;40a; : Hold Clock and press H+ (Hours) and M+ (Minutes) to match your current local time. Format : The device typically supports both 12-hour and 24-hour formats.0;77c; 0;2a; 18;write_to_target_document7;default0;317;0;4c0;18;write_to_target_document1a;_EZTsacnqGMPJkPIPssqmyQk_20;a5; 2. Programming ON/OFF Schedules  0;16; 18;write_to_target_document7;default0;1e1; 18;write_to_target_document1a;_EZTsacnqGMPJkPIPssqmyQk_20;5e8; 0;855; allows for complex scheduling, such as specific daily combinations (e.g., weekdays only). 18;write_to_target_document7;default0;317;18;write_to_target_document1a;_EZTsacnqGMPJkPIPssqmyQk_20;16; 0;265;0;477; Enter Program Mode : Press the Timer (P) button. "1 ON" will appear on the screen. Set Start Time0;430; : Press D+ to select the days, then H+ and M+ for the specific hour and minute. Set End Time : Press Timer (P)0;498; again until "1 OFF" appears. Set the desired turn-off day and time using the same buttons. Repeat : Continue pressing Timer (P) to set additional programs (up to 28). Save0;8a8; : Press the Clock button to save and exit to the main screen. 18;write_to_target_document7;default0;8a4;18;write_to_target_document1a;_EZTsacnqGMPJkPIPssqmyQk_20;2a; 3. Manual Overrides  0;16; Use the Manual button to cycle through three modes indicated by a line on the screen: 0;16; ON : Forces the load to stay on, overriding all programs. AUTO : Runs your saved ON/OFF schedules.0;77d; OFF : Forces the load to stay off. 0;2a; 18;write_to_target_document7;default0;317;18;write_to_target_document1a;_EZTsacnqGMPJkPIPssqmyQk_20;a5; Technical Specifications  0;16; 18;write_to_target_document1b;_EZTsacnqGMPJkPIPssqmyQk_100;57; 0;996;0;61d; 18;write_to_target_document7;default0;318;18;write_to_target_document1b;_EZTsacnqGMPJkPIPssqmyQk_100;26c;0;7f4; 18;write_to_target_document7;default0;349;18;write_to_target_document1b;_EZTsacnqGMPJkPIPssqmyQk_100;292b;0;33ea; SINOTIMER TM630S sinotimer tm630s manual

Sinotimer TM630S is a digital programmable 7-day weekly timer switch used to automate electrical equipment like streetlights, water heaters, and industrial appliances. It supports up to 28 ON/OFF daily programs with a high-capacity 30A resistive load pic-control Key Controls & Buttons Clock (Circle Icon): Hold this to adjust current time/day. P (Timer): Enter the programming menu for ON/OFF cycles. D+ / H+ / M+ / S+: Adjust Day, Hour, Minute, and Second respectively. C/R (Cancel/Recall): Used to clear program settings or unlock the keypad Switches between (force on), (force off), and (program control). Step-by-Step Programming Guide 1. Unlock the Keypad Before making any changes, you must unlock the device. C/R button 4 times until the lock symbol (usually a small "a" or similar icon) disappears from the screen. 2. Set the Current Time and Date button and simultaneously press: to set the day of the week. to set the current hour. to set the current minute. to set the current second. 3. Set ON/OFF Programs

Product Report: Sinotimer TM630S Topic: Operational Manual and Functionality Overview Subject: Sinotimer TM630S Digital Programmable Timer Switch

1. Executive Summary The Sinotimer TM630S is a micro-computer controlled digital timer switch designed for automating electrical appliances. It allows users to program specific ON and OFF times for devices, reducing energy consumption and enhancing convenience. This report consolidates the essential operational instructions, technical specifications, and programming guidelines found in the standard user manual. 2. Product Specifications Sinotimer TM630S is a heavy-duty, 7-day digital programmable

Model: TM630S Voltage: AC 110V – 240V (50/60Hz) Current Rating: Typically 16A (Resistive load) / 20A (Max) Power Consumption: < 2W Time Accuracy: < 1 second per day Programs: Supports up to 16 ON/OFF programs (some variations support up to 20) Battery Backup: Rechargeable built-in battery (Ni-Mh) to retain settings during power outages. Operating Temperature: -10°C to +40°C Mounting: DIN Rail mounted (Standard 35mm DIN rail).

3. LCD Display and Interface The unit features an LCD screen displaying the current time, status, and program details. Key icons include:

ON / AUTO / OFF: Displays the current output status. Clock Icon: Indicates current time mode. Number Display: Shows current time or program numbers. Buttons: Auto-Lock: The keypad automatically locks after 30 seconds

Clock: Return to clock display / confirm settings. Timer: Enter programming mode. Manual: Switch between ON, AUTO, and OFF modes. Hour / Min / Week: Adjust time values and days. Reset: Clear settings (recessed button).

4. Quick Start Guide (How to Use) Step 1: Initial Setup and Charging Before first use, connect the timer to the power supply. It is recommended to leave it connected for several hours to charge the internal backup battery fully.