Bonavita Hudson Ii Lifestyle Crib Instructions ⭐ Validated

| Problem | Likely Cause | Solution | | :--- | :--- | :--- | | | Bolts not fully torqued OR floor is uneven | Place a furniture shim under the footboard leg. | | Mattress is too low/high | Forgot to adjust the 4 height settings | You must remove the mattress and support board to re-index the pins. | | Squeaking noise | Wood rubbing against metal bracket | Apply paraffin wax (candle wax) to the bolt threads. Do not use oil. | | Conversion kit doesn't fit | You bought the Hudson I kit (older model) | The Hudson II uses a wider spacing. Verify model number on the back of the headboard. |

: Insert a barrel nut into each pre-drilled hole in the stabilizer bar. Align them so they are ready to capture the bolts. bonavita hudson ii lifestyle crib instructions

The metal spring frame must be oriented so the cross-bars face downward (away from the mattress) to prevent snagging or uneven surfaces. The frame attaches to the crib ends using specialized bolts or hooks. | Problem | Likely Cause | Solution |

Even with clear , issues arise.

Disclaimer: These instructions are a general guide. For the most accurate torque specifications and bolt sizes, refer to the physical manual included with your specific manufacture date. Do not use oil

Bonavita uses M6 metric bolts . Do not use standard hardware store bolts. If you lose the kit, order Bonavita OEM parts. Using the wrong thread pitch will strip the Poplar wood permanently.