Wittmann Tempro Plus D 360 Manual !!hot!!

Place the D 360 on a level, vibration-damped surface. Maintain a minimum clearance of 300 mm on the rear and left side for air intake. The ambient temperature must not exceed 45°C.

Features maximum temperature monitoring, backflow sensors, and pumps that are safe to run dry. Wittmann Tempro Plus D 360 Manual

: Abruptly cutting power while the heater is active can cause permanent damage. Place the D 360 on a level, vibration-damped surface

The D 360 operates under high pressure to keep water liquid above 100°C. Never open the cooling water bypass or disconnect hoses while the unit is hot or pressurized. Automatic Cooling: Never open the cooling water bypass or disconnect

This manual is a representative technical guide. Always refer to the official Wittmann documentation accompanying your specific unit. Firmware version R8.2.3 or higher required for all described features. Last revision: September 2024.

Wittmann Tempro Plus D 360 (likely referring to the high-capacity or variants with