This is a driver package from Intel designed for Windows installation media (typically used during a clean OS installation). It enables the operating system to detect and manage storage devices configured in RAID (Redundant Array of Independent Disks) or Intel RST (Rapid Storage Technology) modes, without using VMD (Volume Management Device) technology.
Extract the contents to a folder on your Desktop, then copy that extracted folder onto your bootable Windows installation USB drive. Important: The folder must contain Intel Community Phase 2: Installing the Driver During Windows Setup Boot from USB: rapid intel storage technology f6flpyx64nonvmdzip
is disabled in the BIOS or for older hardware (typically 10th Gen Intel® Core™ platforms and earlier). F6 Installation Method This is a driver package from Intel designed
: The actual translator that spoke the language of silicon. Important: The folder must contain Intel Community Phase
f6flpy-x64-non-vmd.zip file is a standalone package of Intel Rapid Storage Technology (RST)
Boot your PC from the USB and proceed to the screen. Click Load Driver at the bottom left. Click Browse and navigate to the folder on your USB.
f6flpyx64nonvmd.zip is a legacy-style Intel RST driver package intended for loading during Windows installation on non-VMD Intel platforms so the installer can recognize SATA/RAID controllers and attached drives. Use the vendor-matching version, prefer built-in installers for post-install configuration, and switch to VMD drivers when your hardware requires them.